• HOME

This article has been translated. For the original please click here.

Effects obtained by Cool Sculpting and Cool Tech Define, differences in treatment time and number...

0
0

SHARE

Slimming

Cool Sculpting and Cool Tech Define are a type of fat cooling machine.

It is said that by cooling the area where you want to lose weight, you can destroy fat cells and lose weight partially . Both are treatments that adjust the body line and face line, and are not intended to lose weight .

Cool Sculpting and Cool Tech Define have something in common that you can expect partial thinning by cooling the part you are aiming for slimming, but there are differences in the corresponding part, treatment time, number of treatments, approval by the Ministry of Health, Labor and Welfare, etc. By checking the differences between them, you can choose the fat cooling machine that suits you.

Fat cooling slimming that can be expected to be partially slimming by cooling

Fat cooling

Fat cooling is a procedure that can be expected to cause partial thinning by cooling the area where you are aiming for slimming. The human body is made up of about 60% water. Water begins to freeze at 0 ° C, while fat cells that store subcutaneous fat begin to freeze at 4 ° C. This is called cryolipolysis theory.

Partial slimming is expected by freezing and destroying fat cells at a temperature of 4 degrees or less, which is the temperature at which fat cells in the area to be slimmed freeze , using the temperature difference that fat cells start to freeze faster than water. I can do it.

Adipocytes that are frozen and destroyed by fat cooling fall into a state called cell death, in which they cannot act as fat cells. Cell-dead adipocytes are preyed on and digested by macrophages that prey on and digest foreign substances such as cell-dead cells and their debris. Fat cells that are not preyed on by macrophages are excreted from the body together with sweat, urine, and stool from lymphatic vessels and blood vessels.

Since the skin, surrounding tissues, and other cells are damaged below 0 degrees, it is said that if the treatment site is not cooled too much by fat cooling, the skin, surrounding tissues, and other cells will not be damaged and there will be almost no downtime. I will.

Mechanism that fat cooling is hard to rebound

Subcutaneous fat is one of the adipose tissues made up of multiple fat cells. Fat cells have the function of storing the ingested energy as fat. The more energy you store, the larger your fat cells will be.

However, fat cooling can reduce the number of fat cells that store energy by freezing and destroying fat cells, so it is said that rebound is difficult unless excessive energy is inoculated.

Cool sculpting that destroys fat cells at 4 ° C

Fat cooling

Cool sculpting is a type of fat cooling machine developed based on cryolipolysis theory. Developed by Zeltic of the United States, it is the pioneer of fat cooling machines.

After placing a special gel pad on the part where you want to slim down, attach a cup-shaped applicator that sucks and stores subcutaneous fat together with the skin, and keeps the temperature inside the applicator at 4 degrees where only fat cells freeze. Partial slimming can be expected by freezing and destroying . In addition, it is a safe machine with a function to automatically stop in the unlikely event that the temperature drops below 4 ° C.

It has been approved by the Ministry of Health, Labor and Welfare for its safety due to its low incidence of side effects affecting skin, surrounding tissues, and other cells other than fat cells, and its effectiveness in reducing fat cells. .. In addition, the safety and efficacy have been recognized by the US FDA (Food and Drug Administration), which is the Ministry of Health, Labor and Welfare of Japan.

Those who are suitable for cool sculpting

  • Those who have fat parts that do not fall off on a diet
  • Those who are not good at exercising or dietary restrictions
  • Those who are easy to rebound
  • Those who cannot take downtime
  • Those who want to receive treatment with a machine approved by the Ministry of Health, Labor and Welfare
  • Those who are resistant to surgical liposuction surgery

Those who cannot receive cool sculpting

  • Cryoglobulinemia, cold agglutinemia, paroxysmal cold blood
  • Those with pigmenturia
  • People with cold hypersensitivity such as cold urticaria and Raynaud's disease
  • Those with cutaneous sensory disorders
  • Those who have a hernia at or near the treatment site
  • Pregnant and lactating
  • Those under 20 years old
  • Those who have a metal implant embedded in the treatment site
  • Those with urticaria
  • Those with low temperature hypersensitivity
  • Those who have open wounds or infected wounds
  • Those with peripheral circulatory disorders
  • Those with a history of cancer
  • Those who have undergone surgery or have scar tissue within 1 year
  • Those with bleeding disorders, those using blood anticoagulants
  • Those with neuropathy such as postherpetic neuralgia or diabetic neuropathy
  • Those who have skin symptoms such as eczema, dermatitis, and rash at the treatment site
  • Those with a subcutaneous fat thickness of less than 1 cm at the treatment site
  • Those whose BMI value exceeds 30
  • Those who are judged not to be accepted by other doctors

Cool Tech Define that can treat 4 parts at once

Fat cooling

Cool Tech Define is a type of fat cooling machine developed based on cryolipolysis theory. A fat cooling machine released after Cool Sculpting, developed by Cocoon Medical of Spain. With the machine introduced for the first time in 2019 in Japan, it is possible to perform treatments at up to 4 locations at the same time, so fat cooling can be performed efficiently .

Place a gel pad exclusively for Cool Tech Define on the part where you want to slim down. The gel pad contains glycerol, which has a high hygroscopic effect. It is said that glycerol permeates into cells and causes a chemical reaction to temporarily dehydrate the treatment site, allowing the treatment to be performed without affecting the skin, surrounding tissues, and other cells other than fat cells .

After placing the gel pad, attach a cup-shaped handpiece that sucks and stores subcutaneous fat together with the skin, and freezes and destroys fat cells at -5 ° C to -10 ° C to expect partial slimming.

Adipocytes destroyed by Cooltech Define die and are preyed on and digested by macrophages, a type of white blood cell. Fat cells that are not preyed on by macrophages are excreted from the body through lymphatic vessels and blood vessels together with sweat, urine, and stool.

In addition, like Cool Sculpting, Cool Tech Define freezes and destroys only fat cells, which is effective because of its low incidence of adverse effects on the treatment site, safety, and the effect of reducing fat cells. Has obtained the CE mark certifying that it meets the EU (European Union) safety and effectiveness standards .

Those who are suitable for Cool Tech Define

  • Those who have many parts aiming for slimming
  • Those who have fat parts that do not fall off on a diet
  • Those who are not good at exercising or dietary restrictions
  • Those who are easy to rebound
  • Those who cannot take downtime
  • Those who want to receive treatment with a machine that is safe and effective
  • Those who are resistant to surgical liposuction surgery

Those who cannot receive Cool Tech Define

  • People with cold hypersensitivity such as cold urticaria
  • For people with extremely dry skin
  • Those with bleeding disorders such as blood coagulation disorders, excessive bleeding, and hematomas
  • Those who are taking anticoagulants, immunosuppressants, anticancer drugs, etc.
  • Pregnant and lactating
  • Those who have a metal plate etc. in the treatment area
  • Those who are using implantable medical devices such as pacemakers
  • Those with diseases related to organs such as heart, liver and kidneys
  • Those who have or are suspected of having a malignant tumor or precancerous lesion on the skin
  • Those who have skin diseases or infectious diseases at the treatment site
  • Keloids are found at the treatment site ・ People with keloid constitution
  • Those who are infected with herpes virus
  • Persons with neuropsychiatric disorders
  • Those with mental illness
  • Those who have a hernia at the treatment site
  • Those who are injecting synthetic substances such as silicon into or around the treatment site
  • When skin sagging or cellulite is noticeable at the treatment site
  • Those with extremely low subcutaneous fat
  • Pregnant and lactating
  • Those under 20 years old
  • Others who are judged by the doctor to be unsuitable for treatment

Difference between Cool Sculpting and Cool Tech Define

the difference

Difference between application site and treatment time for Cool Sculpting and Cool Tech Define

For Cool Sculpting and Cool Tech Define, the application site and treatment time differ depending on the applicator and handpiece used. The treatment time for Cool Sculpting is 35 to 75 minutes, and that for Cool Tech Define is 45 to 70 minutes .

In addition, cool sculpting can be performed at one place per vehicle. When performing treatment on multiple sites, it takes time because the treatment on one site is completed and then the procedure on another site is performed .

Therefore, it is said that Cool Tech Define, which can perform treatments in 4 places with one unit, is suitable when performing treatments in multiple places. However, if you are a medical institution that has multiple cool sculpting kitchens, you can perform multiple treatments by using multiple cool sculpting units at the same time .

Applicable part of cool sculpting and treatment time

There are 9 types of applicators that can be attached to areas where you want to lose weight. There are eight types of cup-shaped suction type applicators that suck and store subcutaneous fat together with the skin, and one type of flat type applicator that is attached to areas where it is difficult to suck subcutaneous fat together with the skin, such as the outside of the thighs. The applicator to be used and the treatment time differ depending on the part to be treated .

In addition, the Cool Advantage series, which is one of the suction type applicators, has three applicators, Cool Advantage, Cool Advantage Petite, and Cool Advantage Plus, each of which fits according to the curvature of the body called contour. Comes with parts that can be used.

Applicators and contours are said to be more effective for partial slimming if the doctor selects them appropriately according to the treatment site and fat mass .

Applicator type Recommended site of indication Treatment time
CoolMax Lower abdomen 60 minutes
CoolCore abdomen 60 minutes
CoolCurve + flank 60 minutes
CoolFit Inner thigh 60 minutes
CoolMini Submandibular 45 minutes
CoolAdvantage Side, abdomen, inner thigh 35 minutes
CoolAdvantagePetite Side / inner thigh 35 minutes
CoolAdvantagePlus Abdomen / flank 45 minutes
CoolSmoothPro Outside thigh 75 minutes

Applicable part and treatment time of Cool Tech Define

Cool Tech Define has nine types of suction type handpieces with different sizes and shapes. By using different handpieces depending on the part of the body, it is possible to perform treatments with finely divided parts .

Wearing a large handpiece forcibly may lead to risks such as pigmentation and frostbite, so it is appropriate to use a body measurement tool dedicated to Cooltech Define to perform the procedure before the procedure. Check if .

In addition, since Cool Tech Define can mount four handpieces on the machine, it is possible to perform simultaneous treatment on up to four parts. If you are aiming for slimming in one area, you can perform the procedure in only one area.

Types of handpieces Applicable site Treatment time
oval HP Inner thigh, outer thigh, etc. 70 minutes
Straight HP Abdomen, inner thighs, etc. 70 minutes
Curved HP Side, banana roll, etc. 70 minutes
Oval Curved HP Abdomen, waist, etc. 70 minutes
Double HP Abdomen etc. 70 minutes
Tight HP Abdomen, upper arm, etc. 70 minutes
Angled HP Mons pubis etc. 70 minutes
Tiny HP Upper arm etc. 45 minutes
Tiny Curved HP Under the chin, etc. 45 minutes

Differences in recommended number of treatments and treatment intervals between Cool Sculpting and Cool Tech Define

the difference

Recommended number of treatments Treatment interval
Cool sculpting 1-2 times Open for about 2 months
Cool Tech Define 3-4 times Open for about one and a half to two months

Recommended number of treatments and interval of cool sculpting

Cool sculpting is said to reduce about 20% of the fat cells that can be sucked into the applicator with one treatment, and many people feel the effect with one treatment. However, since there are individual differences in how the effect is felt depending on the site to be treated and the amount of fat, if the effect is not felt in one treatment, a second treatment is recommended for the same site .

If you wish to have a second treatment on the same site, it is recommended to wait about 2 months . However, since the safety of the third and subsequent treatments has not been confirmed, the maximum number of treatments for the same site is two.

Recommended number of treatments and treatment interval of Cool Tech Define

Cool Tech Define is said to reduce about 40% of the fat cells that can be sucked into the handpiece with a single treatment, and in most cases you will feel the effect with a single treatment. However, depending on the site to be treated and the amount of fat, 3 to 4 treatments are recommended .

In addition, if you wish to perform more than one treatment on the same site, Cooltech Define recommends treatment with a period of one and a half to two months .

Difference between Cool Sculpting and Cool Tech Cost Market

the difference

Cool sculpting cost quote

The price of cool sculpting varies depending on the applicator used, but it is about 60,000 to 120,000 yen per site to be treated .

Applicator type Recommended site of indication Estimated price
CoolMax Lower abdomen About 120,000 yen
CoolCore abdomen About 100,000 yen
CoolCurve + flank About 60,000 yen
CoolFit Inner thigh About 60,000 yen
CoolMini Submandibular 45,000-80,000 yen
CoolAdvantage Side, abdomen, inner thigh 44,000-80,000 yen
CoolAdvantagePetite Side / inner thigh 45,000-65,000 yen
CoolAdvantagePlus Abdomen / flank 90,000 yen to 120,000 yen
CoolSmoothPro Outside thigh 55,000 to 100,000 yen

Cost price per part of Cool Tech Define

The price varies depending on the handpiece used by Cool Tech Define, but it is about 29,800 to 100 million yen per treatment site .

Types of handpieces Applicable site Estimated price
oval HP Inner thigh, outer thigh, etc. About 29,800 to 80,000 yen
Straight HP Abdomen, inner thighs, etc. About 29,800 to 80,000 yen
Curved HP Side, banana roll, etc. About 29,800 to 80,000 yen
Oval Curved HP Abdomen, waist, etc. About 29,800 to 80,000 yen
Double HP Abdomen etc. About 29,800 to 80,000 yen
Tight HP Abdomen, upper arm, etc. About 29,800 to 80,000 yen
Angled HP Mons pubis etc. About 29,800 to 80,000 yen
Tiny HP Upper arm etc. About 24,800 yen to 55,000 yen
Tiny Curved HP Under the chin, etc. About 24,800 yen to 55,000 yen

Differences between Cool Sculpting and Cool Tech approval by the Ministry of Health, Labor and Welfare

the difference

Cool sculpting is a medical device that has been approved by the Ministry of Health, Labor and Welfare in 2017 for its low incidence of side effects that adversely affect the treatment site and the effect of destroying fat cells and reducing the fat layer . .. (Medical device approval number: 22900BZX00410000)

On the other hand, Cooltech Define is not a medical device approved by the Ministry of Health, Labor and Welfare, but it has obtained the CE mark by meeting the safety and efficacy standards of EU (European Union) member states .

Differences between Cool Sculpting and Cool Tech Define downtime and side effects

the difference

Side effects downtime
Cool sculpting May be accompanied by redness, swelling, dull pain, internal bleeding, etc. at the treatment site Almost none * However, if it is accompanied by redness, swelling, dull pain, internal bleeding, etc., it takes about 1 to 2 weeks.
Cool Tech Define May be accompanied by redness, swelling, dull pain, rash, itch, rash, internal bleeding, pain and discomfort at the treatment site Almost none * However, if accompanied by a rash, rash, etc., it takes about several days to several weeks, and if it is accompanied by internal bleeding, pain, redness, swelling, dull pain, discomfort, or itching, it takes about 1 to 2 weeks.

Cool sculpting downtime and side effects

Cool sculpting has few side effects and downtime.

However, immediately after the procedure, redness, internal bleeding, swelling, and dull pain may occur at the site of the procedure . If the treatment site is accompanied by redness, internal bleeding, swelling, dull pain, etc., it is said that it will be sedated in about 1 to 2 weeks at the longest .

Cool Tech Define Downtime / Side Effects

Cool Tech Define also has few side effects and downtime. However, in rare cases, the treatment site may be accompanied by redness, swelling, dull pain, rash, itching, rash, internal bleeding, pain, and discomfort .

If you have a rash or rash, it is said that it will subside within a few days to a few weeks . In addition, if the treatment site is accompanied by internal bleeding, pain, redness, dull pain, swelling, discomfort, or itching, it is said to be sedated in about 1 to 2 weeks .

What Cool Sculpting and Cool Tech Define have in common

Common

Risks of Cool Sculpting and Cool Tech Define

In rare cases, Cool Sculpting and Cool Tech can cause pigmentation at the treatment site . However, in most cases , it will settle down in a few months to a few years . However, there are individual differences in how the symptoms appear, so if you have any concerns after the procedure, please consult your doctor.

If you are concerned about pigmentation , use a drug or machine to peel to promote skin turnover, or use a laser to destroy the melanin pigment that causes pigmentation. Improving deposition is faster .

Pain during Cool Sculpting and Cool Tech Define

Common

Cool Sculpting and Cool Tech Define are said to cause almost no pain during the procedure . However, when the applicator or handpiece sucks fat together with the skin, you may feel a sensation of pulling, stretching, or lightly pinching, or a feeling of coldness or tingling when the skin cools , but it is not enough to require anesthesia. It is said that it is not.

In addition, Cool Sculpting and Cool Tech Define eliminate the stagnation of blood flow after the treatment and promote the discharge of fat cells that have fallen into cell death, so that the cooled part is loosened. It is said that the more fat you have, the more likely you are to feel the pain of being strongly pinched.

Cool Sculpting How long it takes for the Cool Tech Define effect to appear

Common

It takes about two months for the effects of Cool Sculpting and Cool Tech Define to appear.

It is said that it takes about two months for fat cells cooled by Cool Sculpting and Cool Tech Define to be preyed on and digested by macrophages and excreted from the body together with sweat, urine, and stool as unnecessary waste products for the body. I will. Therefore, it takes time to realize the effect of slimming effect.

Precautions before and after Cool Sculpting Cool Tech Define

Common

Precautions before the treatment of Cool Sculpting Cool Tech Define

Cool Sculpting and Cool Tech Define have no restrictions on daily life, including exercise, bathing and drinking before the procedure. However, for cool sculpting, it is recommended to wear loose clothing that does not tighten the area to be treated on the day .

Precautions after Cool Sculpting Cool Tech Define

One thing to keep in mind after Cool Sculpting and Cool Tech Define is to avoid overdrinking and eating too much to gain weight . It is said that Cool Sculpting and Cool Tech Define reduce fat cells by freezing and destroying them, making it difficult to rebound.However, if you eat and drink and gain weight, the remaining fat cells will be removed. Enlarge.

Adipocytes are widely present under the skin of the whole body, and the number of adipocytes is most likely to increase around the age of 10 to 18, and it is said that the number of adipocytes is unlikely to increase or decrease significantly after reaching adulthood. However, since fat cells have the function of storing the energy they ingest, the more energy they store, the larger the fat cells become. When the size of enlarged fat cells reaches 130 μm, they cannot grow any further and divide and increase.

Adipocytes are said to be 70 μm to 90 μm when the BMI value is 20 to 21. It is said that when the BMI value exceeds 27, the size of the fat cells reaches 130 μm and the fat cells divide, so be careful not to exceed the BMI value of 27.

Aftercare after Cool Sculpting Cool Tech Define

care

Fat cells that have died during the procedure are preyed on and digested by macrophages, and are also excreted from the body as sweat, urine, and feces. Therefore, it is recommended to drink plenty of water after the treatment to promote metabolism .

In addition, it is said that even after being massaged at the medical institution that received the treatment, you can expect more effects by massaging the treated area yourself at home .

In addition to Cool Sculpting and Cool Tech Define, treatments that can be expected to cause partial thinning

Slimming

Fat dissolving injection that can be expected to partially slim by injecting a drug into the site aiming for slimming and reducing fat cells

Fat dissolving injection is said to be able to destroy fat cells by injecting a drug into the area where you want to lose weight . By destroying and reducing fat cells, the thickness of subcutaneous fat can be reduced and partial thinning can be expected.

In addition, since lipolytic injection can be performed on any part of the skin where the subcutaneous fat is thick, it is possible to perform treatment on the part where the Cool Sculpting Applicator or Cool Tech Define handpiece cannot be attached .

Kratu Alpha, a type of fat cooling machine

Kratu Alpha is a type of fat cooling machine. There are seven types of cup-shaped applicators that suck and store subcutaneous fat together with the skin. Since each applicator was developed to provide treatment suitable for the body shape of Japanese and Asians, it is said to be the size suitable for the Japanese and Asian systems.

With Kratu Alpha, you can expect partial thinning by attaching an applicator to the part you are aiming for slimming and cooling at -9 degrees for 40 to 50 minutes . In addition, since it is equipped with two applicators, it is possible to perform treatments at two sites aiming for slimming at the same time.

M sculpt that can be expected to partially lose weight by irradiating the treatment site with electromagnetic energy that causes supermaximal muscle contraction

M sculpt is a slimming treatment that can be expected to partially lose weight by irradiating the part aiming for slimming with electromagnetic energy called HIFFM .

HIFFM is an application of the same magnetic field as MRI, which captures a cross section of the body. Irradiating the treatment site with HIFFM causes hypermaximum muscle contraction that cannot be reached by normal spontaneous muscle movement. The body that has caused hypermaximum muscle contraction needs energy to convert the fat stored in fat cells into energy called free fatty acids (FFA) to replenish the energy.

However, it is said that FFA produced by hypermaximal muscle contraction is overproduced and the body cannot consume energy, and FFA accumulates in surrounding fat cells and destroys fat cells .

Tesla former that causes muscle contraction by stimulation by magnetic field

A medical slimming machine that employs a technology called FMS that generates a magnetic field is a tesla former , which causes contraction by giving stimulation by a magnetic field to muscles and tightens by aiming to improve basal metabolism by increasing muscle mass. It is possible to aim for a new body line.

The magnetic field stimulation generated by FMS is said to act up to about 7 cm under the skin, and the magnetic field stimulation generated by the Tesla former treatment is said to cause about 50,000 strong muscle contractions per 30 minutes .

It is possible to stimulate the muscles in each of the shallow and deep layers, and it is expected that the basal metabolism will be improved by increasing the muscle mass.

Liposuction that removes fat directly by making a small hole in the area where you want to lose weight

Liposuction is an operation to physically remove fat by making a small hole of several mm with a scalpel in the area where you want to lose weight and inserting a thin tube called a cannula . Although it has the advantage of having an immediate effect because it physically sucks fat, there is a risk of scarring, infection, surface irregularities, hematoma, dysesthesia, etc. depending on the skill and experience of the doctor in charge of surgery .

In addition, downtime depends on the treatment site. It is said that it takes about 1 to 2 weeks for facial treatment and about 3 to 6 months for body treatment .

How to choose a medical institution to receive Cool Sculpting and Cool Tech Define

doctor

Allergan, Inc., which developed Cool Sculpting, holds a comprehensive course on Cool Sculpting called "Cool Sculpting University" by a specialist instructor at the Allergan headquarters in the United States. In the general course, you will learn from the mechanism of fat cooling treatment to practical training using a demo machine, and you will be awarded a certificate after completing all the courses.

Therefore , if you are a medical institution with a doctor who has been awarded a certificate from Allergan, you can receive cool sculpting treatment with confidence .

Cool Tech Define can be used in 4 places with one unit, so if you want to slim down multiple parts, you can perform the treatment efficiently. However, although Cool Tech Define may be effective once, it is recommended to perform 3 to 4 times depending on the treatment site.

Therefore, when undergoing Cool Tech Define treatment, a medical institution with a doctor who will confirm the ideal body line and face line properly at the time of examination and counseling and decide the number of times and the handpiece to be used. If so, you can receive the treatment with confidence .

0
0

SHARE